Prestige APSRS - Negative Output Control (NOC)

APSRS_RevC_9/19
16
Detailed Descripons: Setup Opons
Negave Output Control (NOC)
Negave Output Control (NOC) allows the installer to program any NOC output for any NOC opon. For example, if
an installer is not using the GREEN/WHITE Dome Light output, but requires a second Remote Start Status Output, the
system can be programmed to change the output ming. Once programmed in the NOC Menu, the GREEN/WHITE wire
will operate with the same funcon as the LIGHT BLUE (Remote Start Status).
Note: This can only be programmed using the FlashLogic Weblink or Weblink Mobile.
Ch. 4 AUX
Lock
Unlock
2nd Unlock
Trunk
Remote Start Status
Ignition
Pulse After Shutdown
Domelight
Headlight
Defrost
LED
Ch. 5 AUX
Ch. 6 AUX
Ch. 7 AUX
Pulse During Crank
Accessory
Factory Arm
Factory Disarm
Trunk Release
This opon supplies a pulse when the trunk funcon is acvated from the remote control or system
Door Lock
This opon supplies a pulse when the Lock funcon is acvated from the remote control or system.
Door Unlock
This opon supplies a pulse when the Unlock funcon is acvated from the remote control or system.
2nd Door Unlock
This opon supplies a pulse when the Unlock funcon is acvated from the remote control or system (2) two mes
within 10sec. This requires Feature Bank 2, Feature 10 to be programmed ON.
Remote Start Status
This output supplies an output for the enre remote start runme programmed in Feature Bank 3. This output will
acvate before the Ignion output and remain on for 4sec aer shutdown.
Ignion
This opon will supply an output for the enre remote start runme programmed in Feature Bank 3. This output will
turn on aer Remote Start Status and remains on during engine crank. This output will turn o with shutdown.
Accessory
This opon will supply an output for the enre remote start runme programmed in Feature Bank 3. This output will
turn on aer Remote Start Status and will turn o during engine crank. This output will turn o with shutdown.
Factory Disarm
This opon supplies output before remote start and when the unlock funcon is acvated from the remote control or
system.
Factory Arm
This opon supplies an output aer remote start and with the lock funcon from the remote control or system.