Prestige APSRS - Page 18

APSRS_RevC_9/19
18
Auxiliary Output Control (AUX Control)
Auxiliary (AUX) output control allows each AUX Channel output to be customized to the user or vehicle's need. See
the list below for a detailed descripon of the available opons. AUX Ch. Outputs can only be programmed using the
FlashLogic Weblink or Weblink Mobile.
Detailed Descripons: Setup Opons
1 Second Pulse
10 Second Pulse
15 Second Pulse
20 Second Pulse
30 Second Pulse
Push & Hold
Latch ON/OFF
Latch 10min
Latch Runtime
5 Second Pulse
15 Second Pulse
This opon supplies a 15 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
1 Second Pulse
This opon supplies a 1 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
5 Second Pulse
This opon supplies a 5 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
10 Second Pulse
This opon supplies a 10 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
20 Second Pulse
This opon supplies a 20 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
30 Second Pulse
This opon supplies a 30 second pulse each me the AUX Ch. is acvated from the remote or CarLink System
Latch 10min
This opon will supply an output when the AUX Ch. is acvated from the remote control or CarLink system and remain
on for 10 min.
Latch ON/OFF
This opon will supply an output when the AUX Ch. is acvated from the remote control or CarLink system and remain
on unl the AUX Ch. is acvated again.
Runme Latch
This opon will supply an output when the remote start is acvated and remain on for the runme selected on Feature
Bank 3, Feature 3.
Push & Hold
This opon will supply an output when the remote buon is pressed by the user and will remain on unl the user
releases the remote buon.