Hardware and Software Setup 5
Section 2: Hardware and Software
Setup
A. INSTALLING LABEL STOCK
Your printer will utilize a wide variety of paper label stock.
As long as the label stock is paper and can receive ink jet
printing and is within the allot-
ted size, it will work in the print-
er. Primera carries a large vari-
ety of paper label stock that has
been converted and ready for
use with your printer.
1. Open the Top Cover.
2. Pull the spring loaded label
stock guide out far enough
to fit the label stock.
3. Remove any shipping tape
from your label stock roll to
ensure that it can unroll freely, making certain that no adhesive
portion is exposed. It is important to note that any exposed
adhesive surface can attach itself to the inner workings of the
print mechanism and cause a media jam.
Note: If you are using fan-fold label stock or label stock other than standard
square / rectangular die cut labels, see Sections 2B and 2C for additional
instructions.
Label Stock Guide
Stock Guide Rollers
To Next Page
Loading...
