28 Running Your First Job
the Disc-to-Disc option from the main File: New Job drop-
down menu.
Be sure to click the checkbox that reads Make a Temporary
Image on the Hard Disc and Copy From There. The job
will build automatically, make the number of copies you've
specified, and delete the disc image afterwards.
When creating an Audio Job from the Application Window,
MP3 and WAV files are converted to CD Audio “on the
fly.”
5. Wait until the image is completely built and then close the
Disc Explorer dialog.
6. From the Menu bar, select File: New Job or New Global-
Image or Other Image Job. A Job Window will now open
in the right side of the application.
7. In the Image Job dialog box, enter the name of the .GI file
you just created into the Image field name. A drop-down
box will contain all the recent images you created and you
can easily select from this list if you choose.
8. Also in the Image Job dialog box, check the box labeled
Print if you have a printer installed and wish to print a
print image onto each disc after it has been recorded.
PrimoDVD 2.0 supports STD files from SureThing CD
Labeler included with your printer or PRN files described
in the following section.
In the drop down box to the right of the Print checkbox,
you can select any recently used .std or .prn files. Or, click
the … box next to the print dialog box to browse for saved
files. Find the file you wish to print, highlight it, and click
Open. Or, double-click on it. The file appears in the Image
Job Window print dialog box with its path.
9. In the Drive List, highlight the recorder icon. This is where
the software will send the job for recording. Right click on
the icon and select Select/Deselect as Recorder.
10. In the Image Job dialog box, set the number of copies, the
speed (if you select a speed that the recorder does not
support, it will default to the immediate lower one), and
the action you desire: Test, Test and Record, Record, Verify
and Record, etc.
To Next Page
Loading...
