PRIMERGY TX200 S3 - Page 261

261
PRIMERGY TX200 S3 User’s Guide
9
Operation and Maintenance
 Starting Server Management Tools
` Before starting the system from the "Server Management Tools" disk, check to see that the "OS Boot
Monitoring" function of ServerView is disabled (default setting).
If the system is started with this function enabled, the server may automatically turn off or restart
improperly.
If the "OS Boot Monitoring" function is needed, it should be reset to enabled before resuming normal
server operation. For details of ServerView, refer to "ServerView User's Guide".
1 Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
The window for selecting a keyboard appears.
2 Select a keyboard.
Select [1] for Japanese keyboard or select [2] for English keyboard. Japanese keyboard is
selected by default.
3 Enter the following command and press the [Enter] key.
A:\SMT>IPMIVIEW.EXE
The menu window of Server Management Tools appears.
` Only the following functions are supported by Server Management Tools.
•System Event Log (SEL)
•User Management
•Channel Configuration (LAN / Serial)
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection
General Information
Temperature Information
Fan Information
Voltage Information
Current Information
Powersupply Information
Processor Information
System Event Log (SEL)
FRU Information (ID Proms)
User Management
Channel Configuration (LAN / Serial)
SDR-R Viewer
FSC/System Specific Functions
FUJITSU
SIEMENS
COMPUTERS
IPMI-Tool - Vx.xx
< > Select <ENTER> Start <ESC> Exit