40 PROGRAMOVACÍ MANUÁL 540876_A_PUB_DATE_1_FEB_2012.DOC
Menu Item Default Info Limits
Off Time 3 sec The wash action, motor Off Time.
Gentle wash action : 12 sec.
(The suggested default values can be adjusted at the Initialization
menu)
1 - 99 sec
Time 4.0 Min The Prewash Sequence Time.
(for 0 Minutes the Prewash sequence will be skipped)
(programmable in steps of 0,5 Minutes)
0 - 99.5 Min
Signal No When a signal is programmed, a pause will be
introduced at the end of the Wash Step. This allows
the operator to add soap for the next step. A buzzer
signal warns the operator that the cycle has been
interrupted.
No / Yes
To Next Page
Loading...