Pro Mach Orion CTS Flex Stretchwrapper - Conveyor Timers

Orion Machine Manual
Revision 3.0 CTS Flex Stretchwrapper
25 July 2016 System Operation
Page 3-31
Conveyor Timers Screen
This is the Conveyor Timers screen. On this screen, you may set the amount of time, in
milliseconds that each conveyor runs past the load at conveyor sensor. This screen will
vary depending on your machine configuration.
Figure 3 - 23
The Conveyor Timers
Screen
Table 3-22. The Conveyor Timers Screen Button Descriptions
STATE 1 DESCRIPTION
LOAD CLEAR TIMER
Press this button to enter the load clear timer, in milliseconds. This is the amount of
time that the load continues to travel past the Load at Conveyor sensor.
BACK Press this button to go to the Machine Setup screen.