ProCurve 2900 User Manual

TACACS+ Authentication
Controlling Web Browser Interface Access When Using TACACS+ Authentication
Controlling Web Browser Interface
Access When Using TACACS+
Authentication
Configuring the switch for TACACS+ authentication does not affect web
browser interface access. To prevent unauthorized access through the web
browser interface, do one or more of the following:
■ Configure local authentication (a Manager user name and password
and, optionally, an Operator user name and password) on the switch.
■ Configure the switch’s Authorized IP Manager feature to allow web
browser access only from authorized management stations. (The
Authorized IP Manager feature does not interfere with TACACS+
operation.)
■ Disable web browser access to the switch by going to the System
Information screen in the Menu interface and configuring the Web
Agent Enabled parameter to No.
Messages Related to TACACS+
Operation
The switch generates the CLI messages listed below. However, you may see
other messages generated in your TACACS+ server application. For informa-
tion on such messages, refer to the documentation you received with the
application.
CLI Message Meaning
Connecting to Tacacs server The switch is attempting to contact the TACACS+ server identified in the switch’s tacacs-
server configuration as the first-choice (or only) TACACS+ server.
Connecting to secondary
Tacacs server
The switch was not able to contact the first-choice TACACS+ server, and is now
attempting to contact the next (secondary) TACACS+ server identified in the switch’s
tacacs-server configuration.
4-28

ProCurve 2900 Specifications

General

Brand	ProCurve
Model	2900
Category	Switch
Language	English