ProCurve 2900 - Viewing 802.1 X Open VLAN Mode Status

Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Viewing 802.1X Open VLAN Mode Status
You can examine the switch’s current VLAN status by using the show port-
access authenticator vlan and show port-access authenticator < port-list > com-
mands as illustrated in figure 9-17.
ProCurve (config)# show port-access authenticator vlan
Port Access Authenticator VLAN Configuration
Port-access authenticator activated [No]: Yes
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Access Unauth Auth
Port Control VLAN ID VLAN ID
---- -------- -------- ------- -
1 Auto 100 101
2 Auto 100 101
3 Auto 100 0
4 Auto 100 101
ProCurve (config)# show port-access authenticator 1
Port Access Authenticator Status
Port-access authenticator activated [No] : No
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Auth Unauth Untagged Tagged
Port Clients Clients VLAN VLANs Port COS
---- -------- -------- -------- ------ ---------
1 101 100 1 101
Figure 9-17. Example Showing Ports Configured for Open VLAN Mode
9-62