Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section Page
show ip ssh 6-17
[keylist-str] [< babble | fingerprint>]
aaa authentication ssh
<public key file> [<append | manager | operator>]
show crypto client-public-key [<manager | operator>] 6-25
show crypto host-public-key [< babble | fingerprint >] 6-14
show authentication 6-21
crypto key < generate | zeroize > ssh [rsa] 6-11
ip ssh 6-16
port < 1 - 65535|default > 6-16
timeout < 5 - 120 > 6-16
login < local | tacacs | radius | public-key > 6-18, 6-20
< local | none > 6-18
enable < tacacs | radius | local > 6-18
< local | none > 6-18
copy tftp pub-key-file <tftp server IP> 6-25
clear crypto client-public-key [keylist-str] 6-26
1. Assigning a Local Login (Operator) and
Enable (Manager) Password
At a minimum, ProCurve recommends that you always assign at least a
Manager password to the switch. Otherwise, under some circumstances,
anyone with Telnet, web, or serial port access could modify the switch’s
configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax: password < manager | operator | all >
6-9
To Next Page
