Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Displaying 802.1X Configuration,
Statistics, and Counters
802.1X Authentication Commands page 9-19
802.1X Supplicant Commands page 9-49
802.1X Open VLAN Mode Commands page 9-31
802.1X-Related Show Commands
show port-access authenticator page 9-54
show port-access authenticator config page 9-55
show port-access authenticator statistics page 9-57
show port-access authenticator session-counters page 9-58
show port-access authenticator vlan page 9-59
show port-access authenticator clients page 9-60
show port-access authenticator clients <port-list> detailed page 9-61
show port-access supplicant page 9-64
Details of 802.1X Mode Status Listings page 9-62
RADIUS server configuration pages 9-27
Show Commands for Port-Access Authenticator
Syntax: show port-access authenticator [port-list]
[config | statistics | session-counters | vlan | clients [detailed]]
If you enter the show port-access authenticator command with-
out an optional value, the following configuration informa-
tion is displayed for all switch ports, or specified ports, that
are enabled for 802.1X port-access authentication:
• Port -access authenticator activated: Are any switch ports
configured to operate as 802.1X authenticators using the
aaa port-access authenticator command? Yes or No
• Allow RADIUS-assigned dynamic (GVRP) VLANs: Are RADIUS-
assigned dynamic (GVRP-learned) VLANs supported for
authenticated and unauthenticated client sessions on the
switch? Yes or No
• Auth Clients: Number of authorized clients
• Unauth Clients: Number of unauthorized clients
9-53
To Next Page
Loading...
