3310F Series Operation Manual 39
PSTAR: setting the start power, The LCD display shows 「OPP」on upper
5 digit LCD display, Middle 5 digit LCD display「PSTAR」,lower 5 digit
LCD display setting
value, the unit is "W", the setting range is 0.00W to the
full scale of the CP mode specification. The setting is by rotating the setting
knob.
PSTEP: setting the increment step power, The LCD display shows 「OPP
」on upper 5 digit LCD display, Middle 5 digit LCD display「PSTEP
」,lower 5 digit LCD display setting
value, the unit is "W", the setting range
is 0.00W to the full scale of the CP mode specification. The setting is by
rotating the setting knob.
PSTOP: setting the stop power, The LCD display shows 「OPP」on upper
5 digit LCD display, Middle 5 digit LCD display「PSTOP」,lower 5 digit
LCD display setting
value, the unit is "W", the setting range is 0.00W to the
full scale of the CP mode specification. The setting is by rotating the setting
knob.
To Next Page
Loading...