PROLiNK PRN3006L - Router Installation; System Requirement; Router Positioning

PROLiNK® PRN3006L 4G LTE Wireless Router
2 Router Installation
2.1 System Requirement
In order to setup PRN3006L you would need to ensure the following item in the list is available.
• SIM Card of 2FF size (Mini SIM).
• Ethernet Cable with RJ45 connector at both end.
• Computer equip with Ethernet Network adapter RJ45 (10Base-T or 100Base-TX or 1000Base-
TX).
• Wireless Network Adapter capability IEEE802.11b/g/n.
• Web Browser (Microsoft Edge, Chrome, Firefox, Opera, or Safari).
2.2 Router Positioning
Precaution and preparation step before setup PRN3006L:
• Place the PRN3006L in well ventilated place and avoid from exposed to moisture or excessive
heat.
• Avoid from placing PRN3006L near from strong electromagnetic reference, such as
microwaves.
• Place PRN3006L where it can be connected to multiple client and power source to ease the
installation work.
• Place PRN3006L where the mobile signal for the operator carrier have higher mobile signal.
• Ensure to use a wired connection during setup process to avoid any possible setup problems.
5