PROLiNK PRN3009 - PRN3009 Router Installation; Setup Requirement; Router Placement Guide

PROLiNK
®
PRN3009 (R) Wireless-N 300 Routers
5
2 PRN3009 Router Installation
This chapter guides you on how to set up a router with your ISP network. Please ensure do not place
the router in an enclosed area such as closet and cabinet. This placement is to prevent the temperature
of the device increase, or it causes the performance of the router to decrease.
2.1 Setup Requirement
To setup Extender PRN3009 you need to ensure the following item in the list is available.
• Internet Access (DSL, Modem or existing Wireless Router).
• Ethernet Cable with RJ45 connector at both ends.
• Computer equips with Ethernet Network adapter (10Base-T or 100Base-TX or 1000Base-TX)
with capability IEEE802.11a/b/g/n/ac.
• Web Browser such as (Microsoft Edge, Chrome, Firefox, Opera, or Safari).
2.2 Router Placement Guide
For the best Wi-Fi signal transmission between PRN3009 and Client devices that connect to it:
• Place the PRN3009 in a well-ventilated place and avoid exposure to moisture or excessive heat.
• Keep away or avoid placing PRN3009 from electrical devices or appliance that generate the
electromagnetic wave. To prevent Wi-Fi signal interference and signal loss
• Place PRN3009 where it can be connected to multiple client and power source to ease the
installation work.
• If possible, use a wired connection below 2 meters during the setup process to avoid any
problem possibilities