PROLiNK PRN3009 - Repeater; Repeater WISP Mode Setup

PROLiNK® PRN3009 Wireless-N 300 Routers
8
Repeater / Repeater WISP Mode Setup
The following is a step to setup PRN3009 as a Wi-Fi Repeater or Repeater WISP. Make sure your
internet connection source is coming from the main router. Follow the step below to complete the
hardware connection.
1. Turn OFF PRN3009 Router.
2. Connect Ethernet cable between Computer LAN port to PRN3009 LAN port.
3. Turn ON power PRN3009 and Please ensure the power LED indicator is light up once turn-on.
The booting up process takes a few seconds to complete. When the PRN3009 is ready to set up,
the LED indicator for Power, Wi-Fi, and LAN lit up green.