PROLiNK PRN3009 - Wireless Repeater Configuration and Status; LAN Configuration and Status

PROLiNK® PRN3009 Wireless-N 300 Routers
38
Wireless Repeater Configuration and Status
This information only available on Repeater Mode and Repeater (WISP) Mode. It shows the
information about wireless mode, the SSID of the host router connected, Authentication and Encryption
of the host router, Host Router BSSID or MAC address and the state connection between PRN3009
with the host router.
LAN Configuration and Status
This information shows the LAN configuration for each mode. The first info is Attain IP Protocol. For
Repeater, Access Point and the client is getting from Host Router which it shows “DHCP Connected”,
for Router, Repeater WISP and Client WISP it shows the Fixed IP. The IP address is the LAN IP
address, Subnet Mask, Default Gateway, DHCP Server and the MAC address for LAN.