PROMETHEUS PATHWAY MR-20 User Manual

PATHWAY
®
MR-20 OPERATOR’S GUIDE
31
Goals (Continued)
CHAPTER 2: OPERATION
Changing the Goal Value From the Default of 10 µV
Use the Up and Down Arrow Keys to change the goal value for
EMG A and EMG B.
Single key presses will incrementally increase or decrease the goal value.
Use the Up Arrow Key to increase the goal value, and the Down Arrow Key to
decrease the goal value. Press and hold down the Up or Down Arrow Keys for larger
changes.
Pressing the Up or Down Arrow Keys once will momentarily show the current goal set-
ting on the numeric display rather than the current EMG activity. Goals above 10 µV
are changed in increments of 1 µV, goals below 10 µV are changed in increments of
0.1 µV. Both the digital display and the position of the goal arrow will change to reect
the current goal. When the desired goal is displayed, release the Up or Down Arrow
Key. The Pathway
®
MR-20 will return to the active display in a few seconds.

PROMETHEUS PATHWAY MR-20 Specifications

General

Brand	PROMETHEUS
Model	PATHWAY MR-20
Category	Control Systems
Language	English