PATHWAY
®
MR-20 OPERATOR’S GUIDE
35
Special Functions Chart
To enable special functions, press the A & B keys simultaneously and hold
for a few seconds.
CHAPTER 2: OPERATION
NOTE: Special functions time out after 5 seconds.
Obsolete Functions
Download Data: This was used with a legacy software that is no longer supported.
This function will not work with the current Pathway
®
MR-20.
Stim Control: STIM CONTROL can only be used with a functional stimulator
device. THE PATHWAY
®
MR-20 DOES NOT PRODUCE STIMULATION. For details
on the operation of the STIM FUNCTION, see page 32 for details, or contact
The Prometheus Group
®
at 1-800-272-8492.
Modes marked with ** are
Obsolete Functions