PROMETHEUS PATHWAY MR-20 User Manual

PATHWAY
®
MR-20 OPERATOR’S GUIDE
37
Selecting the WORK/REST MODE (Continued)
The device will return to the active screen and IMMEDIATELY start a session
prompting the patient to work and rest for (the set number of seconds). During the
WORK/REST MODE, a WORK INTERVAL is signaled by three short beeps and the
REST INTERVAL is signaled by one long beep. If an error is made when conguring
the WORK/REST INTERVALS, simply wait for the device to enter the active screen
and repeat the WORK/REST MODE key sequence.
In the WORK/REST MODE the session can also be completed by turning the device
off before the number of completed trials.
Use the Up and Down Arrow Keys to adjust
between 0 and 180 seconds.
Use the Up and Down Arrow Keys to set the
number of trials (combination of work and rest
intervals) between 1 to 20 trials.
When the session is complete,
END OF SESSION will be displayed.
CHAPTER 2: OPERATION

PROMETHEUS PATHWAY MR-20 Specifications

General

Brand	PROMETHEUS
Model	PATHWAY MR-20
Category	Control Systems
Language	English