Only in
„Batch“
mode: The batch variable is the metering volume, which is
metered at an external pulse or pressing of key
[P/OK]
.
If adjustment using the
[arrow keys]
is not precise enough, use the stroke
adjustment dial for fine adjustment.
Other key functions:
Simultaneous pressing of the two
[arrow keys]
triggers the "Priming" func‐
tion.
Error displays are acknowledged by brief pressing of the
[P/OK]
key.
2 s
2
2
2
1
1
Adjustment
Mode
Continuous
display
Stop/start pump
Change directly changeable variables
= security lock ("Lock menu")
= security lock ("Lock all")
Priming
Start batch (only in "Batch" mode)
Acknowledge errors
Check adjustable values
Fig. 31: Operating options with a locked operating menu
10.2 Remote operation
There is an option to control the pump remotely via a signal cable - refer to
your system documentation and to the "Electrical Installation" chapter.
The pump can also be remotely controlled via PROFIBUS
®
(option). Sup‐
plementary instructions are available for this.
Or via an external CANopen bus. Supplementary instructions are available
for this.
Batch size
Priming key
Acknowledge errors
Operation
69
To Next Page
Loading...
Need help?
General
