Promise Technology VTrak J310S User Manual

VTrak J610s, J310s Product Manual
42
P20 ---------- ---------- ---------- ---------- ---------- 0x8F
P21 ---------- ---------- ---------- ---------- ---------- 0x8F
P22 ---------- ---------- ---------- ---------- ---------- 0x8F
P23 ---------- ---------- ---------- ---------- ---------- 0x8F
InDW:Invalid Dword Count DsEr:Disparity Err Count
DwLo:Dword Sync Loss Count
PhRe:Phy Reset Problem Count CoVi:Code Violations Cnt
PhCh:Phy Change Count
The following items are reported in the table above. All counts are hexadecimal:
• Link number – Links are PHYs, numbered P0 through P23.
The Link Status list matches Link number to Port number, where you can
identify the specific disk drive or external SAS port reported in the Link
Counter. See page 40.
• Invalid D-word Count
• Disparity Error Count
• PHY Reset Problem Count
• Code Violation Count
• PHY Change Count
If the count is zero, the counter shows dashes (----------). The fact that errors
occur does not necessarily indicate a problem or that the J610s or J310s unit is
malfunctioning.
An individual error count that increments regularly indicates a possible problem
and requires further investigation.
Clearing the Error Count
To clear the link error count:
cli>link -a clear
Route Command
To view the SAS addresses of the devices in your domain:
cli>route
The system returns:
Routing Table Mapping:
Entry# SAS Address CnID
---------------------------------------------------
0159 500000E0114D8FB2 CN2
0163 500000E0114C2252 CN2
0202 500000E0120B3562 CN2

Promise Technology VTrak J310S Specifications

General

Brand	Promise Technology
Model	VTrak J310S
Category	Disk array system
Language	English