Protec COMPACT 2 NDT - Maintenance Protocol

COMPACT 2 NDT
User Manual
519
0
-
0
-
0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
37
von
65
6.3.3 Maintenance Protocol
Installation
Name: Machine type: Serial number:
Technician: Training: by:
Telephone: Date: Guarantee until:
Parameters Set
Developer temp: Dryer temp: Cycle time:
Dev.reg. volume: Dev.reg. volume: Anti oxidation:
Changed by: Date: Film type:
Developer temp: Dryer temp: Cycle time:
Dev.reg. volume: Dev.reg. volume: Anti oxidation:
Changed by: Date: Film type:
Developer temp: Dryer temp: Cycle time:
Dev.reg. volume: Dev.reg. volume: Anti oxidation:
Changed by: Date: Film type:
Maintenance work performed
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Date Date Date Date
Name Name Name Name
Next maintenance: Next maintenance: Next maintenance: Next maintenance:
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Date Date Date Date
Name Name Name Name
Next maintenance: Next maintenance: Next maintenance: Next maintenance:
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Maintenance work
performed
Date Date Date Date
Name Name Name Name
Next maintenance: Next maintenance: Next maintenance: Next maintenance: