Protec COMPACT 2 NDT - Technical Specifications; Performance Specifications; Environmental and Physical Data

COMPACT 2 NDT
User Manual
519
0
-
0
-
0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
60
von
65
10 Technical specifications
Film transport
Continuous roller transport system
Film
format
s
In general
:
sheet film
s u
p to
max. 45
.
1cm(17
.
7
’’)
width;
Smallest film format 10x10 cm (4x4 ’’).
Processing
capacity
174
films
24x30 cm, crosswise,
(10x12 “)
shortest
processing time
Processing time
2
-
10
min.; adjustable in steps of 0.1
-
min.
Linear speed
15.5
-
76 5
cm/min., depending on selected
process time
Developer time
28
-
142
sec, depending on selected
process
time
Tank capacities
:
12.5 l developer, 12 l fixer, 13l water
Circulation system
Developer and fixer are
continuously
circulated
by a circulation pump
Replenishment
Automatic by film surface measurement in
relation to processed film; quantity adjustable;
time replenishment can be activated.
Developer temperature
Adjustable 2
6
-
40
°C (
78
.
8
-
104
°F)
Fixer temperature
Adjusted to developer temperature by heat
exchanger
Dryer temperature
Adjustable
35
-
70C°
(95
-
158°F)
, temperature
achieved depends on main voltage
Water connection
Permissible water pressure 2
-
10 bar (29
-
145
psi),
permissible water temperature 5 - 30 °C (41 - 86
°F)
Water consumption
1.9 litres per minute (0.5 gal/min) when
processing.
Drain
capacity
11
litres per minute
Noise level
Less than 5
9
dB(A)
Heat emission
During processing approx.. 1.5kJ/s.
Pollution degree
2
Weight (processor)
Emp
ty 77 kg/*91kg (170/*200
lbs)
Filled 115 kg/*129 kg (254/*284 lbs)
Dimensions (LxWxH)
97 x 68 x
127cm (38.2x26.8x50”)
Floor space required
0.
67
m
²
(7.2
sqft)
* Values with closed base cabinet.