Edge
TM
Multipoint and Quickbridge - Hardware Installation Guide 56
a. Weatherproofing antenna connectors on the device:
b. Weatherproofing antenna cable:
Step 6: Place a small zip tie over the last wrap of tape to prevent it from unwrapping over time.
The figure below depicts the complete weatherproofing of the RF connection.
8.2.6 Aligning the Antenna
Antenna alignment is the process of physically aligning the antenna of the radio receiver and transmitter to establish a link
with a better throughput. The antenna alignment process is usually performed during the installation of the antennas. You
can align the antennas by using the following two methods:
• Antenna Alignment using CLI Commands
Alternatively, consult an antenna installation service professional to optimize the antenna alignment.
(a)
(b)
(a)
(b)
To Next Page
Loading...
