15
3 PART B - INSTALLATION
WARNING
RESPECT THE LOCAL CODES (WHEN IN DOUBT, CONSULT YOUR LOCAL
DEALER).
Before installation, please read the instructions carefully and make sure
you understand them:
Installation must be made in accordance with the CSA B.365 « Installation code
for solid-fuel-burning appliances and equipment » standard in Canada and NFPA
90B « Standard for the installation of warm air heating and air conditioning
system » in the United States. Moreover, for all electrical connection, the
Canadian standard CSA C22.1 « Canadian electrical code » and in the United-
States NFPA 70 standard « National Electrical Code » must be followed.
Inspect the furnace to make sure that nothing has been damaged in the shipping.
Pull out the wiring kit and the instructions manual from the firebox of the furnace
and the accessories from the flue pipe.
All controls and adjustments must be performed by a qualified technician. The
blower speed must conform to the recommendations of the Warm Air Heating
and Air Conditioning National Association and should respect the static pressure
ranges in the warm air plenum of the furnace (see table, General technical data,
static pressure of the chosen configuration).
PART B of this manual contains installation instructions for the three different
configuration of the Caddy furnace. For installation information, you can consult
only the section that applies to the configuration you have chosen.
CADDY WOOD ADD-ON ............................................. 16
CADDY WOOD ONLY .................................................. 38
CADDY WOOD/ELECTRIC COMBINATION ............... 49
CADDY WOOD/OIL COMBINATION ........................... 64
To Next Page
Loading...
