36
CADDY ADD-ON
3.1.7 OPERATING INSTRUCTIONS
Operate the existing furnace periodically to ensure that it will operate
satisfactorily when needed.
On the wood furnace, the thermostat controls the air inlet damper. When the
thermostat calls for heat, the damper opens and the combustion is stirred up.
When the furnace gets hot enough, the fan limit control activates the blower
motor at the speed selected for wood heating.
When there is no call for heat, the air inlet damper must be completely closed
and the chain must be affixed to the damper motor at the“8 o’clock” position. *
*(With all reserve on the minimum air to be increased depending on the type and
quality of the combustible)
To Next Page
Loading...
