Pullnet AGENT-2 S41D Line - Physical Ports; Switch Management; Web-Based Browser Interface; Administration Console Via RS-232 Serial Port (CLI)

2 AGENT-2 S41DLine - User Manual AG2-S41D/MU-EE
Ed. Jun-2012 Proprietary information 14 of 89
3.5 Physical Ports
The AGENT-2 S41D Hardened Managed Advanced Ethernet Switch provides:
Up to 24-port 10/100Base-TX (or 18-port 100Base-FX/BX) and/or 4-port
10/100/1000Base-TX with Gigabit SFP socket combo (or 4-port 1000Base-SX/LX/BX
or 2-port 10/100/1000Base-TX with 2-port 1000Base-SX/LX/BX)
CONNECTIVITY
 RJ-45 connectors on TX ports
 ST or SC connector on 100Base-FX fibre port
 SC connector on 100Base-BX fibre port
 SC connector on 1000Base-SX/LX/BX fibre port
MODE SELECTION
 10Base-T full-duplex mode
 10Base-T half-duplex mode
 100Base-TX full-duplex mode
 100Base-TX half-duplex mode
 100Base-FX full-duplex mode
 1000Base-T/SX/LX full-duplex mode
 Auto-negotiating mode
3.6 Switch Management
3.6.1 Web-based browser interface
The AGENT-2 S41D also boasts a point-and-click browser-based interface that lets
friendly-user access as well as full switch configuration and operation, from a Netscape
or Internet Explorer browser.
3.6.2 Administration console via RS-232 serial port (CLI)
The AGENT-2 S41D provides an onboard serial port, which allows the switch to be
configured via a directly connected terminal.
3.6.3 External SNMP-based network management application
AGENT-2 S41D Switches can also be configured via SNMP.