More information on solving problems with connection to Stream Vision 2 by
following the link.
Missing or interrupted broadcasting via Wi-Fi
Possible cause
The smartphone or tablet is beyond reliable Wi-Fi range. There are obstacles
between the device and the signal receiver (e.g. concrete walls).
Solution
Move the devices in line-of-sight and within range of the Wi-Fi signal.
More information on solving problems with connection to Stream Vision 2 by
following the link.
When the device is used in low temperature conditions
the image quality is worse than in positive temperatures.
Possible cause
In positive temperature conditions, objects being observed (surroundings and
background) heat up differently because of thermal conductivity, thereby
generating a high temperature contrast. Consequently, the image quality
produced by the thermal imager will be better.
In low-temperature conditions, objects being observed (background) will cool
down to roughly the same temperature, which leads to a greatly reduced
temperature contrast and a degraded image quality. This is normal for all
thermal imaging devices.
Residual horizontal lines and traces of horizontally placed
objects during observation process.
Possible cause
To Next Page
Loading...
