Bluetooth
Turn on/off Bluetooth
1. Press and hold the MENU (6) button to enter the main menu.
2. Select the Bluetooth submenu with the UP (5)/DOWN (7) buttons.
3. A short press of the MENU (6) button opens the submenu.
4. Turn Bluetooth on/off with a short press of the MENU (6) button.
5. Press and hold down the MENU (6) button to exit the submenu.
The process of connecting the wireless remote control is described in the Remote
Control Activation section.
Calibration Mode
Calibration mode selection.
Calibration enables the device to equalize the microbolometer background temperature
and eliminate the image flaws (such as vertical bars, phantom images, etc.).
There are three calibration modes: Manual, Semi-Automatic and Automatic.
The selected calibration mode is displayed in the status bar (see Status Bar section).
Select the required mode in the Calibration Mode menu item:
1. Press and hold the MENU (6) button to enter the main menu.
2. Use the UP (5)/DOWN (7) buttons to select the Calibration Mode icon.
3. Press the MENU (6) button briefly to enter the submenu.
4. Use the UP (5)/DOWN (7) buttons to select one of the calibration modes described below.
5. Press the MENU (6) button briefly to confirm the selection.
To Next Page
Loading...
Need help?
General