Find answers to frequently asked questions about using Stream Vision
2 here.
Stream Vision 2 Manual
Android
iOS
Firmware Update
1. Download free Stream Vision 2 App in Google Play or App Store.
2. Connect your Pulsar device to your mobile device (smartphone or tablet).
3. Launch Stream Vision 2 and go to section “Settings”.
4. Select your Pulsar device and press “Check firmware update”.
5. Wait for the update to download and install. Pulsar device will reboot and will
be ready to operate.
Important:
• if your Pulsar device is connected to phone, please turn on mobile data
transfer (GPRS/3G/4G) to download update;
• if your Pulsar device is not connected to your phone but is already listed in
“Settings” > “My devices” section, you may use Wi-Fi to download update.
Find answers to frequently asked questions about using Stream Vision
2 here.
Is your firmware up to date?
Click here to check the latest firmware for your device.
To Next Page
Loading...
Need help?
General