in various observation conditions. When the temperature contrast decreases
(fog, precipitation, high humidity), it is recommended to increase the
amplification level.
Option 1:
Press the MODE (7) button briefly to switch the amplification level.
Option 2:
1. Press and hold the MENU (6) button to enter the main menu.
2. Use the UP (5)/DOWN (7) buttons to select the Amplification
Level icon.
3. Press the MENU (6) button briefly to enter the Amplification Level submenu.
4. Use the UP (5)/DOWN (7) buttons to select one of three amplifying levels of
sensitivity (Normal , High , Ultra ).
5. Press the MENU (6) button briefly to confirm the selection.
Smoothing Filter
Used to reduce digital distortion while maintaining a high level of sensitivity.
1. Press and hold the MENU (6) button to enter the main menu.
2. Use the UP (5)/DOWN (7) buttons to select the Smoothing Filter icon.
3. Press the MENU (6) button briefly to confirm the selection.
4. Press the MENU (6) button briefly to turn the filter on/off.
User Mode
The User Mode function saves selected brightness and contrast settings in
the device's memory providing optimal image quality for the next use of the
To Next Page
Loading...
