Formatting should be carried out in case of a memory card error.
Attention! Make sure that you no longer need the files to be deleted or create
a backup on other media.
1. A short press of the MENU (6) button opens the submenu Format .
2. Select the Yes option to format or No to cancel using the UP (5)/DOWN
(7) buttons.
3. Confirm your selection with a short press of the MENU (6) button.
• If Yes is selected, the message "Do you want to format the memory
card?" appears on the display as well as Yes and No Select Yes to format
the memory card.
• Selecting the No option will cancel the formatting and exit the submenu.
Display Alignment
Before using the function, install the thermal imaging module on the optical device
using the adapter.
1. Press and hold the MENU (6) button to enter the menu.
2. Select the Display Alignment option with the UP (5)/DOWN (7) buttons.
3. A short press of the MENU (6) button opens the menu section. An auxiliary cross will
appear on the screen.
To Next Page
Loading...
Need help?
General