PUREWAVE PEMI - 3.2 Therapy Functions; Performing a PEMI Therapy Session

PureWave PEMI User Manual | 06-23 V1.0 Page 15 from 28
PureWave PEMI User Manual
3.2. Therapy functions
The home therapy describes a mode of operation where a PEMI therapy is performed via simple button
programming.
The operation is quite simple. For each therapy, three parameters have to be defined:
• the therapy program (Tranquility, Stability or Vitality)
• the therapy intensity (Int SE-4, Int 5-7 or Int 8-10) Can be set to: Sensitive, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
• the therapy duration (10, 20 or 30 minutes) Can be set to: from 1 to 60 min.
You may select the stated parameters via control buttons on the buttonboard.
After starting the therapy, the display will change to the following view:
The display on the left side is alternating between the current
therapy program and selected therapy intensity.
The right side displays the remaining time until the end of
therapy.
Turning the device on via the On/Off-button
Select one of the therapy programs, by pressing the button
1.
2.
3.
Select one of the time settings, by pressing the button
Select one of the intensity settings, by pressing the button
Start the PureWave PEMI therapy via the Start-button
4.
5.
STABILITY 7:59
MEDIUM 7:59