PUREWAVE PEMI - 9. Technical Data and Symbols Explained; Device Specifications and Environmental Data

PureWave PEMI User Manual | 06-23 V1.0 Page 26 from 28
PureWave PEMI User Manual
• Should a person be on medication, most often the medication may be reduced by the Doctor monitoring
the person in that respect. People may need to work with their doctor to determine new medication
levels needed, which can be reduced if directed by their Doctor.
8.4 Explanation of the signs used
9. Technical data
AC voltage, frequency and power
consumption
115/230 V, 50/60 Hz, 7 W
Power consumption in stand-by mode
maximum 800 mW
Fuse
1 A
Output signal
As a maximum 3 V, 170 mA, 40 μT
Protection degree
BF
Protection against ingress of water
IPX0
Dimensions, Weight
40 mm x 190 mm x 215 mm (h x w x d), 0,688 kg
Display
Dot-matrix, 16 characters
Environmental conditions
Operation of the
device:
Temperature range +10 °C up to
+40 °C
Relative humidity 30 up to 75 %
Transport and
storage:
Temperature range +5 °C up to +50
°C
Relative humidity < 90 %, none
condensing
PureWave reserves the right to modify the design and specification without prior notice.
CE Conformity
sign
Attention! Observe the
instructions for use!
Application part
ungrounded, protection
degree Type BF
This product complies with WEEE Directive 2002/96/EG
(waste electrical and electronic equipment). Separate
collection for electrical and electronic equipment.