Pylontech PowerCube-M1-C

31
3.6.2.1 CAN Communication Mode between MBMS and BMS (battery string qty. ≤6 set)
(battery string qty. ≤6 set)
When system configured PowerCube-M1-C ≤6 set. The communication between PowerCube-
M1-C uses CAN communication mode. The communication between the MBMS and the BMS of
1
st
PowerCube-M1-C uses CAN communication mode.
Note: The 1
st
PowerCube-M1-C should be installed nearest by the MBMS.