5.2.1.5 Handle the battery module out of the rack, and put it to the appoint place.
Warning: Single battery module is 43kg. If without handling tools must more than 3
personnel to handling with it. If install in high place of the rack it must more than 4
personnel.
Un module de batterie pèse
55
kg. Sans outils de manipulation, il est nécessaire de plus de
3
hommes pour manipuler avec lui. Si vous l'installez en hauteur, il faut plus de
4
5.2.1.6 Install the new battery module (see before 5.2.1.1). And connect the normal cables. Refer
to chapter 3.5.
5.2.1.7 Turn on this battery string. Refer to chapter 3.6.
5.2.1.8 Make a fully charge of the system before normal operation.
5.2.2 Replacement of Control Module (BMS)
5.2.1.1 Shut off the whole battery string’s power. Must confirm the D+ and D- terminal are without
power. The turn off progress refer to chapter 3.6.5.
5.2.2.2 Pull out the plugs of Power Cables and the communication plugs.
To Next Page
Need help?
General
