Enforcer Programming Manual
Page: 46
Engineer Menu’s
Clean Start 2000
(Ungraded)
Clean Start 2020
(PD6662 EN Grade 2)
A, B, C, D: Siren Time [04]
Confirm Time [30]
HU Confirm Time [08]
Strobe Time [00]
Re-Arm No [3]
AC Signal Delay [040]
Settle [005]
Double Knock [10]
Pre-Alarm [000] [030]
Line Fault [180] [020]
Set Fail [120] [040]
Fire Siren Time [04]
Set Fail Warning [00]
Wireless Supervision Time [24] [2]
Wireless Jamming Time [100]
Service Time [000]
SET DATE & TIME
Year (00-99) [07]
Month (1-12) [01]
Day (1-31) [01]
Hours (0-23) [02]
Minutes (0-59) [52]
DST Adjust? No [0]
EXIT MODES
A Exit Mode Timed/Final [2] Final Door [1]
B Exit Mode Timed [0]
C Exit Mode Timed [0]
D Exit Mode Timed [0]
CHANGE CODES
5 Digit PINs No [0]
Change Duress Codes All codes empty
Change Master Manager Code
Master Manager Code 2222
User Areas ABCD
User Set Options Unset/Set [0]
Flexi Set Yes [1]
User Name _
Change Engineer Code 1111
VOLUME CONTROL
A, B, C, D Entry 4
A,C, D Exit 4
B Exit 1
Alarm 7
Fire 7
Tamper 6
Day Alarm 6
Chime 3
Intelligent Set 3
Code Stops Sound Yes [1]
E/E Keypads Only No [0]
Alert Kps Only Yes [1]
Silent Tech Alert No [0]
Use Main Sounder Yes [1]
ALARM RESPONSE
Silent 1
st
Alarm Never [0]
Disable Confirm On Entry No [0]
Area A, B, C, D Starts At Digi [3]
Area A ,B, C, D Stops At Confirm [4]
To Next Page
Loading...
Need help?
General
