Need help?Do you have a question about the Pyxis SP-910 and is the answer not in the manual?
General| Brand | Pyxis |
|---|---|
| Model | SP-910 |
| Category | Measuring Instruments |
| Language | English |
Overview of the SP-910's key capabilities and functions, including measurement types and compensation features.
Instructions for safely removing the instrument and accessories from packaging and inspecting for damage.
Details of the essential items included with the SP-910 analyzer for basic operation.
List of additional items available to enhance the functionality or usability of the SP-910.
Description of the sample holder, its function, and cleaning recommendations for accurate measurements.
Explanation of the light shield's purpose, operation, and importance for measurement integrity.
Guidance on inserting the correct type and number of batteries for powering the SP-910.
Explanation of the function of each key on the SP-910's navigational interface.
Steps to power on the SP-910 instrument after battery installation or from a powered-off state.
Overview of the primary screen layout and the eight main feature groups accessible from the main menu.
Procedures for safely powering down the SP-910 instrument.
Details on the automatic power-off feature and how to configure its timing.
Explanation of the LCD backlight power saving function and its settings.
Step-by-step guide for performing PTSA concentration measurements using the SP-910 analyzer.
Instructions for calibrating the SP-910 for accurate PTSA measurements using standards.
Procedure for measuring fluorescein concentration in water samples with the SP-910.
Calibration steps for older firmware versions using specific standard solutions.
Calibration procedure for newer firmware versions with expanded standard options.
List of available colorimetric analysis methods supported by the SP-910, referencing Hach methods.
Guide on navigating and selecting measurement methods from the SP-910 interface.
Explanation of how to perform measurements using a single reaction timing step.
Procedure for colorimetric measurements that require two separate sample vials.
Instructions for performing measurements involving multiple reaction timing steps.
Description of advanced colorimetric measurement techniques supported by the SP-910.
Step-by-step process for conducting single-vial colorimetric measurements.
Guide to configuring measurement parameters and calibrating methods on the SP-910.
Instructions for performing turbidity measurements using the SP-910.
Steps for calibrating the SP-910 for accurate turbidity readings.
Steps to download and install the necessary PC software for firmware updates.
Procedure to put the SP-910 into bootloader or upgrade mode.
Guide for establishing a Bluetooth connection between the SP-910 and the PC software.
To Next Page
