Field Requirements
Password • Length: 5-64 characters
• Valid characters: All ASCII characters
7. Click Next.
The Set the date and time screen appears.
8. Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
9. Click Next.
The Configure the network settings screen appears.
10. Select Obtain an IP address automatically (DHCP).
11. Click Next.
The Cross-platform file transfer service screen appears.
12. Select the types of devices that you will use to access shared folders on the NAS.
13. Click Next.
The Check system disk status screen appears.
14. Select a storage pool to install QES on.
Important
Once the installation process starts, the selected storage pool cannot be modified. Reinitialize
the NAS before selecting a different disk group.
15. Click Next.
The Summary screen appears.
16. Review the settings.
17. Click Apply.
A confirmation message appears.
Warning
Clicking Confirm deletes all data on the drive before installing QES.
18. Click Confirm.
The wizard installs QES and restarts the NAS.
Note
You must initialize any unused disks upon your next login.
Service Port Configuration
The service port is the main point for hardware installation, configuration, and maintenance.
Important
Only use the service port when directed by QNAP technical support personnel.
ES2486dc User Guide
Installation and Configuration 47
To Next Page
Loading...
