2. Product Overview
This chapter provides basic information about the QNAP ES2486dc NAS.
About the ES2486dc
The ES2486dc is a dual-controller ZFS NAS designed to deliver a scalable platform for enterprise-level
solutions. It is equipped with a powerful multi-core processor, AES-NI hardware encryption engine, and both
USB 3.0 and 10GbE ports, allowing it to deliver optimal performance for enterprise users. In addition to 24-
bay capacity, the ES2486dc supports redundant storage controllers and power supplies to provide the
necessary reliability, serviceablility, and read/write speeds.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Memory Power supply
ES2486dc-2142IT-96G Intel® Xeon® D-2142IT 96 GB (48 GB per
controller)
Redundant
ES2486dc-2142IT-128G Intel® Xeon® D-2142IT 128 GB (64 GB per
controller)
Redundant
Component ES2486dc-2142IT-96G ES2486dc-2142IT-128G
Processor
CPU Intel® Xeon® D-2142IT
Frequency 8-core/16-thread 1.90 GHz base/3.0 GHz burst
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory 48 GB RAM: 4 x 4 GB RDIMM
DDR4 ECC and 4 x 8 GB RDIMM
DDR4 ECC
64 GB RAM: 4 x 16 GB RDIMM
DDR4 ECC
ES2486dc User Guide
Product Overview 4
To Next Page
Loading...
Need help?
General
