Component ES2486dc-2142IT-96G ES2486dc-2142IT-128G
USB ports 2 x USB 3.0 Type-A ports per controller
Interface
Buttons NAS:
• Power
• OLED panel power button
Storage controllers:
• Power
• Reset
Dimensions
Form factor 2U Rackmount
Dimensions (H x W x D) 88.3 x 483 x 545.1 mm
(34.76 x 190.16 x 241.61 in)
Net weight 27.41 kg (60.43 lbs)
Other
Rail compatibility RAIL-E03
Note
• You can find installation information in the rail kit
package.
• For details, go to http://srcqnap.qnap.com.tw/en/
product/rail-kit.
Power supply unit 2 x 700W, 90-264V AC, 50/60 Hz
System battery CR2032 lithium battery (3V, 225 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local
regulations or the instructions of the battery
manufacturer.
Hot-swappable battery backup unit 2 x 10.8V, 2200 mAh
Sound level 60.9 db(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.
ES2486dc User Guide
Product Overview 6
To Next Page
Loading...
Need help?
General
