EasyManuals Logo

QNAP TS-109 User Manual

QNAP TS-109
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
- 57 -
3.4.10 DDNS Service
To set up a server on the Internet and enable users to access it easily, a fixed and
easy-to-remember host name is often required. However, if ISP provides only
dynamic IP address, the IP address of the server will change from time to time
and is difficult to recall. You can enable DDNS service to solve the problem.
After enabling DDNS service of TS-109, whenever TS-109 restarts or the IP
address is changed, TS-109 will notify the DDNS provider immediately to record
the new IP address. When the user tries to connect TS-109 via the host name,
DDNS will transfer the recorded IP address to the user.
Enable and configure DDNS of TS-109:
Before using DDNS service, please register a host name from DDNS provider*.
TS-109 supports the 5 DDNS providers: members.dyndns.org, update.ods.org,
members.dhs.org, www.dyns.cx, www.3322.org.
Enable Dynamic DNS Service, and select DDNS server. Then enter the user name,
password, and hostname.
* For the information of DDNS service registration, please refer to the website of
the DDNS providers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-109 and is the answer not in the manual?

QNAP TS-109 Specifications

General IconGeneral
BrandQNAP
ModelTS-109
CategoryGateway
LanguageEnglish