- 51 -
3.4.6 FTP Service
When you enable FTP service, you can define the port number for the service and
maximum number of users connected to the FTP at the same time.
9 Select Protocol Type
Select to use standard FTP connection or SSL/TLS encrypted FTP. Select the
corresponding protocol type in your client FTP software to ensure successful
connection.
9 Unicode Support
Select to enable or disable Unicode Support. The default setting is No.
Since most FTP clients do not support Unicode currently, it is recommended
that you disable Unicode support here and select the language the same as
your OS in “System Settings—Encoding Setting” page so that the folders and
files on FTP can be properly shown (please refer to Chapter 3.3.3). If your
FTP client supports Unicode, make sure you have enabled Unicode support
for both your client and TS-109.
To Next Page
Loading...
General