- 42 -
3.3.2 Date & Time
Set the date, time, and time zone according to your location. If the settings are
incorrect, the following problems may occur:
9 When using a web browser to access the server or save a file, the display
time of the action will be incorrect.
9 The time of event log displayed will be inconsistent with the actual time
when an action occurs.
9 Synchronize with an Internet time server automatically
You can enable this option to update the date and time of the system
automatically with specified NTP (Network Time Protocol) server. Enter the
IP address or domain name of the NTP server, e.g. time.nist.gov,
time.windows.com. Then enter the time interval for adjusting the time.
Note: The first time you enable NTP server, it may take several
minutes for time synchronization before the time is correctly
adjusted.
To Next Page
Loading...
General