Category Item
Hardware and peripherals • Storage drives
For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
• Network cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Setting Up the NAS
Important
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid-State Drives on 2.5-inch Trays
3. Optional: Replace the memory modules.
For details, see Replacing Memory Modules
4. Optional: Connect the expansion units.
For details, see Connecting USB Expansion Units
5. Connect the power cord and all applicable cables.
6. Power on the NAS.
7. Install QuTS hero.
For details, see QuTS hero Installation.
8. Log on to QuTS hero.
TS-h973AX User Guide
Product Overview 11
To Next Page
Loading...
