QOLSYS Panel 2+ - PANEL GLASS BREAK TEST

SYSTEM TESTS
Panel Glass Break Test
Test the panel’s microphones via a clap test or glass break test. This will ensure
the built in detector and microphones are functioning properly when needed.
Panel Glass Break must be enabled under Installer Settings to access this test.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 128 173
Testing
Select “Run” to begin test.
Circle will turn YELLOW
when a successful clap
test has been detected
and Microphones are
listening.
Circle will turn GREEN
when the panel hears the
proper glass break
frequency being detected.
PANEL GLASS BREAK TEST (For North American Market Only - Not functional for CE/EN Grade 2)
FIND IT
PANEL GLASS BREAK
TEST
SYSTEM TESTS
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)