QOLSYS Panel 2+ - CAMERA SETTINGS

QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 42 173
PROGRAMMING
Note: Supplementary feature not
evaluated as part of EN Grade 2
CAMERA SETTINGS
FIND IT
CAMERA SETTINGS
Setting
Default
Description
Secure Delete Images
Enabled
When enabled, a code is required to delete disarm and image sensor
photos
Panel Camera
Enabled
When disabled, all Panel Camera related functions are turned off,
including: Disarm Photos, Alarm Photos, Alarm Videos and Settings
Photos. Additionally the Panel Camera Page is also removed
Disarm Photos
Enabled
When enabled, the built-in camera will take a single photograph
when a user disarms the panel. When disabled, the panel will not
capture images upon disarm
Alarm Photos
Enabled
When enabled, the built-in camera will take a single photograph
during an alarm event
Alarm Videos
Enabled
When an alarm is triggered the panel will record a video clip for 4
mins from it’s built in 5mp panel camera
Camera Settings
Enable/Disable Disarm photos and Alarm photos. Secure images requiring a
code to either view or delete.
Swipe down
for access
INSTALLATION
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)