Amount of time (in seconds) before panel will attempt call to central station after an alarm
event is triggered!
When SIA Limits enabled: :15 to :45 seconds!
When SIA Limits disabled: :0 to :254 seconds
Determine how long before siren stops sounding during an alarm event (4 minutes to 15
minutes). NOTE: For EN Grade 2 the minimum bell time out shall be 90s & maximum bell time out shall not exceed
local regulations.
When enabled, siren will sound when a water or freeze detector is triggered. When
disabled, the panel emits a “water” tone
PowerG Smoke Detector Siren
When set to “Fire Alarms Only”, PowerG Smoke Detectors that are learned into the
system will only sound during fire alarm events. When set to “All Alarms”, PowerG Smoke
Detectors will act as additional wireless sirens and will sound during all alarm events.
Allows Police Panic to be enabled or disabled
Allows Fire Panic to be enabled or disabled
Allows Auxiliary Panic to be enabled or disabled
Allow Master Code To Access Siren
and Alarms
Allow the master code to access these features and settings.
NOTE: Shall not be used for EN Grade 2
To Next Page
Loading...
