quadient DS-1200 G4i

11
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
1 Touch-sensitive monitor
Runs the IMOS operating software and responds to button pushes. a remote
control is also provided, to control basic functions.
2 Vertical Stacker
Holds up to 800 envelopes (DL) for long version, or 400 envelopes for short
version. Fitted with a sensing conveyor that operates on demand to move the
envelope stack forward.
3 Envelope Feeder
Feeds envelopes to the insert head. 1m long with a 70cm long stack capacity.
It also opens the envelope ap.
4 Insert Feeder
Feeds inserts up to 152mm depth, cards, BR envelopes etc. Available with
either a standard or high capacity conveyor. Reading version is available.
5 Hi-Cap/Standard-Cap Feeder
Fits behind an accumulator or folder to feed full sized forms up to 406mm depth.
Capacity of Hi-Cap unit is up to 5000 sheets of 80gsm, Standard-Cap is 2000
sheets. Hi-Cap version has removeable trolley.
6 Accumulator
Collates forms into an accumulator and then delivers them as a group to a
folder, or if too many to fold, diverts the excess. The accumulated group is
then fed to a folder. Accumulation capacity is up to 20 forms, or 8 for folding
together.
7 Diverter
Fitted between an accumulator and folder, it receives forms diverted from the
accumulator, either because of an error condition or an oversize group.
8 Folder
Folds up to 8 forms in C, Z fold, and up to 10 forms in V or double-fold.
3-plate design, and fold plate settings are automatic. Used as an autonomous
unit, or in conjunction with an accumulator. Reading version is available.
9 Track Pair
Up to 8 track pairs can be tted, supporting up to 16 feed/fold units. Includes
the insert track and a shuttle to feed inserts or folded forms onto the track.
10 Insert Head
Receives document stack and inserts it into an envelope using a kicker.
Envelope is then turned over for correct orientation and passes to a ap
wetter/closer to close the ap. The ap is sealed shut as the lled envelope
passes through the exit.