quadient DS-1200 G4i

58
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
11 Operator Adjustments
Prior to running a job, a number of operator adjustments may be needed.
These adjustments are:
• Setting the ngers
• Replacing feeder pick-up rollers
WARNING
Opening any cover of the machine will trigger the interlock safety cut-
o switch and stop the machine operation (including all moving parts),
however, power to the machine will still exist.
Take caution when performing operator adjustments, and ensure all
safety notes detailed in section 2.3 Safety Notes including it’s sub-sections
are read in it’s entirety and understood before any operation, cleaning,
maintenance and or servicing of this machine!
11.1 Setting the ngers
Before making any adjustments to the nger settings, check the correct envelopes
for the job are being used; the envelope ap depth and throat depth must accord
with the envelope settings in the job program (see section 7 Creating a job).
Adjust the throat depth setting on the side of the Kicker to match the envelope and
job setting. Tighten the lock screw when nished.